63
UMG 509-PRO
www.janitza.com
INFORMATION
Event recording can be set with a good over-
view using the GridVis® software (see www.
janitza.com).
INFORMATION
The lead and lag time can be set with a good
overview using the GridVis® software (see
www.janitza.com).
Factory default setting: 0
Fig. Configuring an event
Fig. Display of an overcurrent for an event
Voltage dip
A voltage dip is set in % of the nominal voltage
U
LN
.
Overvoltage
The overvoltage is set in % of the nominal voltage
U
LN
.
Overcurrent
The rapid increase of the current is set in % of the
nominal current.
Apply L2-L4
Monitoring of the events can be configured per
phase. You can apply the settings from phase L1
to phases L2, L3 and L4.
·
No
- The settings from phase L1 are not applied
to phases L2, L3 and L4.
·
Yes
- The settings from phase L1 are applied to
phases L2, L3 and L4.
Limit value
Measured value
Full-wave
effective value
Limit
violations
before the
lead time
End time
Limit violations
before the lag time
Event
Lag time
Lead time
Event start time
(Trigger time)
Event recording
Lead time
Lag time
