UMG 509-PRO
18
www.janitza.com
3.5
EU conformity declaration
Please see the EU declaration of conformity post-
ed at www.janitza.com for the laws, standards
and directives applied by Janitza electronics
GmbH for the devices. The CE conformity mark-
ing requirements for the device arise from the EU
conformity declaration and the laws, standards
and directives mentioned therein.
3.6
FCC Declaration of Conformity
The device:
·complies with Part 15 of the FCC Rules for Class
B digital devices (limits to protect against harm-
ful interference in a residential installation).
·generates, uses and can radiate high-frequency
energy
·can cause harmful interference to radio commu-
nications if not installed and used properly. There
is no guarantee that interference will not occur in
a particular installation.
If there is radio or television reception interference,
which can be determined by turning the device on
and off, proceed as follows:
·Align or reposition the receiving antenna.
·Increase the distance between the device and
the radio/television receiver.
·Connect the device and the radio/television
receiver in different circuits.
·if necessary, contact Janitza support or a radio/
television technician.
Code of Federal Regulations, Title 47, Part 15,
Subpart B - Unintentional Radiators.
3.7
Scope of delivery
3.8
Accessories
Part. no. Designation
21.01.102 Battery type, Lithium CR2450,
3 V, (approval according to
UL 1642)
13.10.539 Profibus connector, 9-pin DSUB
13.10.543 Profibus connector, 9-pin
DSUB, uncoiled
29.01.903 Seal, 144 x 144
Quan-
tity
Part. no.
Designation
1
52.26.xxx
1)
UMG 509-PRO
1
33.03.320
Installation instructions
1
33.03.348
“GridVis Software” Quick
Guide
1
10.01.855
Screw terminal, pluggable,
2-pole (auxiliary supply)
1
10.01.847
Screw terminal, pluggable,
5-pole (voltage measure-
ment 1-4)
1
10.01.853
Screw terminal, pluggable,
8-pole (current measure-
ment 1-4)
1
10.01.873
Screw terminal, plugga-
ble, 6-pole (digital inputs/
outputs)
1
10.01.888
Screw terminal, pluggable,
7-pole (RCM, thermistor
input)
1
10.01.859
Screw terminal, pluggable,
3-pole (RS-485)
1
08.01.505
Patch cable 2 m, twisted,
gray (connection UMG -
PC/switch)
1
52.19.301
Fastening clips
1
) For part number see delivery note
