67
UMG 509-PRO
www.janitza.com
Delivery condition
This is used to reset all settings, such as config-
urations and recorded data, to the factory default
settings. Registered activation codes will not be
deleted.
1.Open the Reset menu.
2.Use buttons 3 or 4 to highlight the "Delivery
condition" item (green marking)
3.Activate the input by pressing button 6.
·The font color changes to red and a cursor
appears.
4.Change the value to "Yes" by pressing button 4.
5.Confirm your entry with button 6.
·The message "Executed" appears in the line -
the delivery condition has been restored.
Restart
Proceed as follows to restart the device manually:
1.Open the Reset menu.
2.Use buttons 3 or 4 to highlight the "Restart"
item (green marking)
3.Activate the input by pressing button 6.
·The font color changes to red and a cursor
appears.
4.Change the value to "Yes" by pressing button 4.
5.Confirm your entry with button 6.
·The device restarts within approx. 10 seconds.
11.5 Display
Here you can adapt the display settings of your
device.
Brightness
You can set the display brightness of the device
here. Proceed according to the pattern described
in the previous sections.
Setting range:
0 .. 100%
Factory default setting:
100%
·0% = dark
·100% = very bright
Standby
Here you can set the time after which the display
brightness switches to the standby brightness
that has been set.
Setting range:
60 .. 9999 sec.
Factory default setting:
900 sec.
Brightness (standby)
Here you can set the display brightness to be
switched to after the standby time has elapsed.
The standby time is restarted by using the buttons
1-6.
Setting range:
0 .. 60%
Factory default setting:
40%
INFORMATION
The backlight service life is extended when the
backlight brightness is lower.