RAC Geo II User’s Manual
3-20
Should you key in an incorrect code number, you can overwrite that number
by simply keying in the correct number. This must be done prior to press-
ing the Enter key. Once you hit the Enter key, the code that was in D-2 is
stored in memory.
Step 8
When the inventory route is completed,
press the
CH
key. Key in an ending
reference code (such as 9999) to mark
the end of the survey, then press
Enter
.
Note that you can store up to 50,000
events in memory when in Store GPS
mode. You can store up to 100,000
events, or up to 30 hours of data, in memory when in Track GPS mode.
Step 9
To exit the memory store function, the RAC must be in Count Hold. Press
the
Menu
key, then press
Enter
. You are now back in normal mode.
To begin another survey, go back to
Step 1
.
Fig. 3.41 —
Enter Ending Reference Code
Summary of Contents for RAC Geo II
