Jamar RAC Geo II, User Manual, Page: 29 / 60

Chapter 3 — Start Up, Key Functions & Menu Options
3-17
Menu 9 - Store GPS &
Menu 10 - Track GPS
These options are the same as Menu 6 - Store Memory, but with the addi-
tion of storing GPS data. The Store GPS and Track GPS options are set up
the same way. However, with Store GPS, GPS coordinates are only saved
to memory when you enter an event. With Track GPS, GPS coordinates are
saved to memory every second, along with events you manually record. Up
to 50,000 events can be stored in Store GPS mode. Up to 100,000 events,
or up to 30 hours of data, can be stored when using Track GPS.
Note: Data collected in either of these modes must be downloaded using
the RACPro software, or other interface software.
Step 1
Press the
Menu
key, then the
#9
key for Store GPS mode or the
Menu
key,
then the #
1
and #
0
keys for Track GPS mode. D-2 indicates the function
you have selected function.
Step 2
Press Enter . The Geo will then switch to display
GPS FO
in D-1 and begin
to look for GPS satellites.
The RAC Geo will display GPS F1 in D-1 once it has found a minimum
number of satellites for a GPS signal (usually in less than 60 seconds).
Fig. 3.33 — Track GPS
Fig. 3.32 — Store GPS
Fig. 3.34 — GPS Search Progression
Used with RACPro software