Jamar RAC Geo II, User Manual, Page: 28 / 60

RAC Geo II User’s Manual
3-16
Menu 8 - Memory Erase
This feature allows you to clear
all
memory locations that have been stored
in the RAC Geo II. Note that when doing this ALL memory locations are
cleared. You are not able to clear partial memory or selected surveys.
Step 1
Press
Menu
, the
#8
key and then
Enter
to access the Memory Erase function.
Erase will be listed in both D-1 and D-2.
Step 2
Press
Enter
and D-1 will begin flashing
to alert you that you are about to clear
ALL
surveys in memory.
Step 3
Press
Enter
again and D-1 will change
to
Done
, indicating that the memory has
been erased.
Step 4
Press
Enter
to return to the initial menu screen, then press
Enter
again to
exit the menu function. You are now back in the normal mode.
Note: If at any point prior to Step 3 you change your mind about erasing
the memory, just press the
Menu
key then
Enter
. You will be returned to
the normal mode without erasing the memory.
Fig. 3.30 — Memory Erase
Fig. 3.31 —
Memory has been erased
Used with RACPro software