Jadever JIF-2002, Manual

Page: 51 / 67

JIF-2002 WEIGHING INDICATOR&CONTROLLER
51
8. When the display reaches " Final - SP 2 ", the SP 2 Output (Pin 11) signal will
come OFF . Closed the Full-Flow Gate by using the SP 2 Output OFF signal.
9. When the display reaches " Final - FREE ", the FREE Output (Pin 10) signal
will come OFF . Closed the Dribble-Flow Gate by using the FREE Output
OFF signal.
10. Batch Finish signal is sent after the set time period (F103) or when the
display is stable.
11. After Free Fall has stopped - check if the HI and LO (Pin 9, 8) signals are
OFF. If both outputs are OFF then the batch is completed correctly.
12. Automatic Free Fall is now recalculated for the next event.
13.The Weighing Hopper Discharge Gate will be opened using the Finish
Output (Pin 7) ON signal.
14. Data Output is sent (Auto print Mode: BCD, RS-232C, RS-422/485, Printer
or Current Loop). The NET Weight data will be accumulated.
15. Signal (Pin 13) will refill using ZERO Band Output if needed.
16. Ready for next batching event.
17. If an Abort signal is sent (Pin 21) anytime after the Start signal is received,
then:(1) SP 1, SP 2 and Free signals will go OFF, and Gates will be closed.
(2) Batch Finish and Data Output signals will be sent.
(3) NET Weight data will be accumulated.