JIF-2002 WEIGHING INDICATOR&CONTROLLER
20
STEP 10:
When press a key, the key number will show in the middle of
the screen. The lower side from left to right:
KEY 001
∼
KEY
008.
The upper side from left to right:
KEY 009
∼
KEY 010
.
If the key number does not match, it suggests an error
occurred. Please contact us.
STEP
11:
Finish checking, display
END .
Slide the
SET
switch to the original side.
※
Above testing if any
FAIL
or error shows on the screen,
please contact us or distributors.
4-2 Functions
STEP 1:
Turn the Power Switch OFF on the Rear Panel, Slide the
SET
switch to the set side.
STEP 2:
Turn the power supply ON, the display will show blinking
SELECT
.
STEP 3:
Press
TARE
key and screen will show blinking
FUNC
and
blinking
F000
afterward.
STEP 4:
Please press
or
key to move through the function
category (F000, F200, F300, F400 or F500). Then press the
↵
Key to enter the category. Use the
or
key to choose
specific function (F000 ~ FC02, F100 ~ F107, F200 ~ 204,
F400 ~ F402 or F500 ~ F506). In each function, please use
or
key to set function value. If you want to return to
previous function category, please press
ESC
key, or press
↵
key to enter.
L
If any errors occurred, please check if each setting value within
effective
range.
L
note
：●
Indicates initial factory setting.
Summary of Contents for JIF-2002
