Jadever JIF-2002, Manual

Page: 35 / 67

JIF-2002 WEIGHING INDICATOR&CONTROLLER
35
4-6 RESTORE SYSTEM PARAMETERS
Restoration can be used when system failed or human operation error
happens.
L
Restoration will not restore set-point parameters.
⌦
System Parameter:
includes functions FXXX, Calibration parameters, disable keys.
⌦
Set-point Parameter: includes Final, SP1, SP2, Free Fall, Hi, Lo.
STEP 1:
Turn the Power Switch OFF on the rear panel. Slide the SET
switch to the set side .
STEP 2:
Turn the power switch ON. The screen will show blinking
SELECT.
STEP 3:
Please press Fn key and a blinking RESTORE will show on
the screen. Please enter
↵
key.
STEP 4:
Use the or key to choose NO or YES . If NO is entered,
the screen will show END . If YES is entered, the screen will
show ……
→
END .
STEP 5 :
Slide the SET switch to the original side for finishing the step.