Jacobsen Tri-King Triplex, Parts And Maintenance Manual

Page: 2 / 250

Copyright 2000 Textron Inc. “All rights reserved, including the
right to reproduce this material or portions thereof in any form.”
To Order Parts
1. Write your full name and complete address on the
order.
2. Explain where and how to make shipment.
3. Give product number, name and serial number that is
stamped on the name plate or serial plate of your prod-
uct.
4. Order by the quantity desired, the part number, paint
code, and description of the part as given in the parts
list.
5. Send or bring the order to an authorized Textron Turf
Care and Specialty Products Dealer.
6. Inspect all shipments on receipt. If any parts are dam-
aged or missing, file a claim with the carrier before
accepting.
7. Do not return material without a letter of explanation,
listing the parts being returned. Transportation charges
must be prepaid.
Use of other than authorized parts will void the warranty.
This manual is designed for the Maintenance and Adjustment of this equipment.
Use the maintenance and adjustment instructions included in this manual and the operating
instructions included in the
Safety and Operation Manual to service the machine.
The Safety and Operation Manual must be kept in the pouch on the back of the seat at all times
for reference by the operator.
Table of Contents
1 Safety
1.1 Operating Safety 4
1.2 Important Safety Notes 5
2 Specifications
2.1 Product Identification 6
2.2 Engine 6
2.3 Cutting Units: 6
2.4 Tractor 7
2.5 Weights and Dimensions 7
2.6 Accessories & Support Literature 7
3 Adjustments
3.1 General 8
3.2 Fan Belt (Diesel Engines) 8
3.3 Pump Drive Belt 8
3.4 Neutral and 3WD Switches 9
3.5 Parking Brake Switches 9
3.6 Lift Limit Switch 9
3.7 Traction Pedal Neutral 10
3.8 Traction Pedal Forward Stop 10
3.9 Lift / Lower Pedal Stop 10
3.10 Parking Brake 11
3.11 Rear Lift Arm 11
3.12 Down Pressure 11
3.13 Reel To Bedknife 12
3.14 Reel to Bedknife Adjustment 12
3.15 Cutting Modes 13
3.16 Cutting Height Adjustment 13
3.17 Removing the Cutting Unit 14
3.18 Cutting Height - Fixed Mode 14
3.19 Cutting Height - Floating Mode 15
3.20 Torque Specification 16
3.21 Specific Torque 16
4 Maintenance
4.1 General 17
4.2 Engine 17
4.3 Engine Oil 18
4.4 Gas Engine Air Filter 18
4.5 Diesel Air Filter 19
4.6 Fuel 19
4.7 Fuel System 19
4.8 Battery 20
4.9 Jump Starting 20
4.10 Charging Battery 20
4.11 Hydraulic Hoses 21
4.12 Hydraulic Oil 21
4.13 Hydraulic Oil Filters 22
4.14 Electrical System 22
4.15 Muffler and Exhaust 22
4.16 Tires 22
4.17 Wheel Mounting Procedure 23
4.18 Care and Cleaning 23
4.19 Radiator 23
4.20 Backlapping 24
4.21 Storage 25
5 Troubleshooting
5.1 General 26
6 Maintenance & Lubrication Charts
6.1 General 27
6.2 Lubrication Chart 27
6.3 Maintenance Charts 28
7 Parts Catalog
7.1 Table Of Contents 29
LITHO IN U.S.A. 3-2000