3 ADJUSTMENTS
GB-8
3
ADJUSTMENTS
3.1 GENERAL ________________________________________________________________
1.
Adjustments and maintenance should always be per-
formed by a qualified technician. If proper adjustment
cannot be made, contact an authorized Textron Turf
Care And Specialty Products Dealer.
2.
Replace, do not adjust, worn or damaged
components.
3.
Long hair, jewelry or loose fitting clothing may get
tangled in moving parts.
4.
Do not change governor settings or overspeed the
engine.
3.2
FAN BELT (DIESEL ENGINES) _______________________________________________
Inspect and adjust new belt after first ten hours of
operation. Adjust every 100 hours thereafter.
1.
Adjust alternator pulley so belt (
B
) deflects 9/32 to
11/32 in. (7 to 9 mm) with a 22 lb. (10 kgf) push at
midspan between pulleys.
2.
If tension is incorrect, loosen alternator mounting
bolts (
A
) and adjust alternator until proper belt
tension is achieved. Tighten hardware (
A
)
Figure 3A
3.3
PUMP DRIVE BELT ________________________________________________________
Adjust reel pump belt (
C
) to deflect 1/4 in. (6 mm) with a
force of 5-7 lb. (2-3 kgf) applied at midspan.
1.
Loosen hardware (
D
and
E
).
2.
Move pump/clutch assembly down to increase
tension on belt (
C
) then tighten hardware (
D
and
E
).
3.
Torque hardware (
D
and
E
) to 27 - 33 ft-lb. (37-45
Nm).
Figure 3B
WARNING
To prevent injury, lower implements to the ground,
disengage all drives, engage parking brake, stop
engine and remove key from ignition switch before
making any adjustments or performing maintenance.
Make sure the tractor is parked on a solid and level
surface. Never work on a tractor that is supported
only by the jack. Always use jack stands.
If only the front or rear of the tractor is raised, place
chocks in front of and behind the wheels that are not
raised.
!
!
CAUTION:
Be careful to prevent entrapment
of the hands and fingers between moving and
fixed components of the machine
!
A
B
D
D
E
E
C
C
Diesel Engine
Gasoline Engine
Summary of Contents for Tri-King Triplex
