Jack 6040-D Operation Instruction Manual Download Page 9

Page: 9 / 79

星火全自动缝纫控制系统使用说明书

Operation Instruction for Xing Huo Automatic Sewing Control System

files. If the automatic identification function of template identifies the template number before
processing, file with this number will be taken as the current processing file automatically.

Lock file key: locks the current processing file to prevent wrong operation, other

processing files can't be chosen after the lock, and

icon will appear in preview area.

Click it once to lock, and click it again to unlock.

Note: only in the locking condition of "Lock file", the automatic template identification

function will work. After identification of the template, it will display on the "Prompt

information area" and the "Current time" interface, and selects the file with corresponding

number automatically.

Acceleration key: rises spindle speed at 100 r/min ascending, increases

continuously if long press (press and hold), until the set maximum speed. It sews one

stitch by one round of the spindle. It can be prohibited to modify rotational speed

arbitrarily through setting a password.

Slow down key: reduces the spindle speed at 100 r/min decreasing, reduces

continuously if long press, until the set minimum speed. It can be prohibited to modify

rotational speed arbitrarily through setting a password.

Bobbin thread statistics key: shows the used length of the current bobbin

thread, press the key to enter the processing statistics interface.

Processing statistics key: displays the number of current completed

processing, press the key to enter the processing statistics interface.

Main menu: press the key to enter the main menu interface.

Manual empty retreat key: press the key to start single step empty retreat

backwards, long press for continuous empty retreat. Empty retreat is that the spindle is

fixed, and XY axis move only, which can be used to preview the position of specified

processing needle, or to start processing from the position of specified needle.

Manual empty advance key: press the key to start single step empty advance

Summary of Contents for 6040-D















































































Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands

Jack 6040-D, Operation Instruction Manual

Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands