星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
72
"V.H008.035”: "V.H008" means the major version number, unchanged after updating;
"035" is the branch version number, which can be changed by updating to higher or lower
version.
Updating steps to system in the figure are as follows:
1) Acquire corresponding update file from suppliers, the file named TZD_H008.TFL
(the file name is different for different major version number), place it under root
directory of U disk
2) Inserted U disk, enter the page of "System Update"
3) Click "OK". Prompt "System update?" pops up , and click "OK"
4) Prompt "Updating, please do not power off" pops up. At this point, make sure
not to power off, otherwise you may need to return to the factory to solve.
5) Wait for about 1 minute, the system will restart; the buzzer beeps once, which
suggests the update is successful. Or it will suggest other error message and exit the
update automatically.
Introductions to relevant error messages:
1. "No update function"
Reason: it means you did not insert U disk or U disk damage.
Solution: insert U disk or reinsert U disk or replace U disk.
2. "File error”
Reason: it means update file named TZD_H008.TFL can’t be found under root
directory of U disk or the update file is not suitable for this system or file data error.
Solution: reinsert U disk, or place the right update file into the root directory.
