Jack 6040-D Operation Instruction Manual Download Page 40

Page: 40 / 79

星火全自动缝纫控制系统使用说明书

Operation Instruction for Xing Huo Automatic Sewing Control System

the original forward and backward 2 needles is greater than 12.7 MM, it will fail to remove.

Forward and backward strengthening key: applicable to the unclosed graph.

Forward and backward reinforcing is the reverse stitching of the head and the tail.

Closed reinforcing key: suitable for closed graph. Closed reinforcing is the overlap

reinforcing to the needle starting direction after reaching the end.

Delete multiple needle key: used to delete multiple stitches after the current cursor

position, graphics changed.

Append needle point key: used to append one (stitch length within 12.7 MM) or

more stitches after the cursor, graphics changed.

Modify functional code key: used to insert a functional code at the current cursor

position.

Needle position modify key: used to modify the needle point position at current

cursor position, graphics unchanged, or to modify all stitches after current needle point,

graphics changed. If the straight line length of forward and backward 2 needles of

modification is greater than 12.7 MM, it fails to modify.

Section offset key: used to modify the stitch way of the currently selected section,

graphics changed.

Section speed modification key: used to modify the processing speed of the

currently selected section.

Overall offset key: used to modify the sewing start position of the currently selected

file, graphics changed.

Secondary origin modify key: used to modify the secondary origin position of the

currently selected file, graphics changed.

Section modify key: used to modify the position of the currently selected section,

Summary of Contents for 6040-D















































































Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands

Jack 6040-D, Operation Instruction Manual

Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands