星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
39
Chapter V Modify File
If a certain part or a point of the currently selected files need to be modified, it can be
finished through "Edit File", or through "Collect File" for adding collection. It is effective for
the graphic edit generated by "Collect File", and graphs converted by attached software may
be not able to be edited due to too many sewing points.
5.1 Main Interface of Modify File
In the main menu interface, press the
key to enter edit file interface, as
shown in figure:
Select the way needed to modify to edit, after the completion, press the
key to
return to the processing main interface.
Functions of keys are introduced as follows:
Add needle point key: used to add a needle point between the needle point of the
current cursor and the next point, graphics unchanged. Stitch length of the adding point is
from 0.1 to (current adding stitch length -0.1) MM; if the length is beyond this range, it will
fail to add.
Delete needle point key: used to delete the stitch point at current cursor position,
graphics unchanged. After removing the current needle point, if the line length combined by
