Jack 6040-D Operation Instruction Manual Download Page 37

Page: 37 / 79

星火全自动缝纫控制系统使用说明书

Operation Instruction for Xing Huo Automatic Sewing Control System

Trim functional code, trim thread when meeting the functional code,

the spindle does not stop.

Auxiliary Frame functional code, the frame rises when meeting the

functional code, the spindle upper stops.

Trim and Up Pause functional code, trim thread when meeting the

functional code, the spindle upper stops.

Offset Point (secondary origin) functional code, the spindle returns to

this point automatically after processing the file.

Note: Offset Point functional code will work only when the following conditions are met:

a. it must be added at the end point of the empty sending section; b. there isn’t any sewing

start point before the empty sending section.

Press keys to add functional code according to need, the characters of selected functional

code will be red; after the setting is completed, press the

key to complete a

functional code adding, and return to the collection interface automatically. You can carry on

the follow-up collection operations.

Attached sewing control software can provide more flexible functional code operations.

4.14 Save File

After completion of file collection, if you need to save the collected files, press

key to enter the save interface, as shown in figure:

Summary of Contents for 6040-D















































































Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands

Jack 6040-D, Operation Instruction Manual

Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands