Jack 6040-D Operation Instruction Manual Download Page 23

Page: 23 / 79

星火全自动缝纫控制系统使用说明书

Operation Instruction for Xing Huo Automatic Sewing Control System

section is multiple line segments.

Press the key once; when the background becomes yellow, the current collection

section is a curve (more than 3 points generate a curve).

Curve generating key: when collection for multiple line segments and curve,

press the key to complete the current section collection.

Speed functional key: press the key to set the collection speed and stitch of

current and subsequent section.

Insert functional key: press the key to enter into insert functional code operation.

Save file key: press the key to save the current file.

Reinforcing functional key: press the key to enter into reinforcing sewing

settings.

Multiple and complementary functional key: press the key to enter into multiple

and complementary sewing settings.

Zig-zag functional key: press the key to enter into the zig-zag sewing (bartack)

setting interface.

Preview collection key: press the key to enter into the preview current collect file

interface.

Cancel collection key: press once, cancel the latest collection.

Confirm key: press the key to confirm the current cursor position, or to complete

collection of the current section. If part of the graphics area to be generated exceeds

processing range, it is unable to be generated.

Summary of Contents for 6040-D















































































Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands

Jack 6040-D, Operation Instruction Manual

Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands