Jack 6040-D Operation Instruction Manual Download Page 52

Page: 52 / 79

星火全自动缝纫控制系统使用说明书

Operation Instruction for Xing Huo Automatic Sewing Control System

5.9.2 Modify All Needle Positions after Current Point

In the modify needle position interface, press the

button to enter to modify all

needle positions after current point interface, the icon background becomes yellow. As shown

in figure:

Press the direction keys to move the cursor to the position where it needs to modify the

stitch point, and the moved distance should be not greater than 12.7 MM, press the

key to complete modification. The subsequent stitches will offset as a whole after the

modification.

It will return to the select stitch interface automatically, and you can continue to edit or

click

button to save the changes and return to the edit file main interface.

5.10 Section Offset

In the edit file main interface, press the

button to enter select stitch interface, as

shown in figure:

Summary of Contents for 6040-D















































































Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands

Jack 6040-D, Operation Instruction Manual

Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands