Jack 6040-D Operation Instruction Manual Download Page 19

Page: 19 / 79

星火全自动缝纫控制系统使用说明书

Operation Instruction for Xing Huo Automatic Sewing Control System

multiple selected files and rename it.

Delete the selected file: deletes the currently selected file or the last

file of multiple selected files.

Batches delete selected files: deletes the currently selected multiple

files.

Move files: moves the currently selected file or the last file of

multiple selected files to the specified position. For example, select "002:TEST2.FLW", click

, in the pop-up dialog box, amend the current sequence number "2" to be "1", click

on "Confirm". It will change to be "001:TEST2.FLW".

Output file: copies selected single or multiple files from memory files

to the root directory of U Disk. If there is any file of the same name in U Disk, it will be

replaced.

Memory, U Disk switch: press the key once switch between

memory and U Disk.

3.2 U Disk File Management

After inserting U Disk, in the memory management interface, press

key to

switch to the U Disk file management interface, as shown in figure:

Summary of Contents for 6040-D















































































Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands

Jack 6040-D, Operation Instruction Manual

Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands