Jack 6040-D Operation Instruction Manual Download Page 53

Page: 53 / 79

星火全自动缝纫控制系统使用说明书

Operation Instruction for Xing Huo Automatic Sewing Control System

Press the Single Step or Continue key to move the cursor forward and backward to the

starting point of section offset, and press the

key, mark with red cursor; press the

Single Step or Continue key to move the cursor forward and backward to the final position of

section offset again, and press the

key to enter the modify setting interface, as shown

in figure:

Section offset will shift the area between the above two selected red cursors overall

towards the location of the movement of direction keys, other parts of the original graphics

unchanged, and ways of

can be used for line segment to connect offset area

and the original figure. If

way is used, the line segment will be processed according to

specified stitch in the right side. Press the

key to complete modification.

It will return to the select stitch interface automatically, and you can continue to edit or

Summary of Contents for 6040-D















































































Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands

Jack 6040-D, Operation Instruction Manual

Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands