星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
27
If it needs to draw accurate arc, refer to coordinate point, to make the height reference
point on the midperpendicular of connection line between start point and end point.
If it needs to adjust the stitch, speed, fastening, complementary sewing, zig-zag sewing
and insert functional code at the end of this section, please refer to relevant setting operations.
This operation may be done at any time before the graphics generation.
4.6 Round Collection
In file collection main interface, press the
key, the key background becomes
yellow, shows that the current section of collection is round mode, as shown in figure:
In round collection, any 3 points collections which are not on the same straight line
generate a round. Processing order: the first point (starting point) > the second point > the
third point > the first point (end point).
Absolute origin or the end point of previous collection section is the first point of round
collection (Start point and end point of the round). Press keys to move the cursor to the
needed position, press the
key to determine the second reference point; Press keys
again to move to the needed position, press the
key to determine the third reference
point, a round will be generated automatically. The presser frame will move to the starting
point position of the round at the same time.
If it needs a precise round, it is suggested to make the distance between the first and the
second points as the diameter of the round; the third point is on the midperpendicular of the
