Jack 6040-D Operation Instruction Manual Download Page 56

Page: 56 / 79

星火全自动缝纫控制系统使用说明书

Operation Instruction for Xing Huo Automatic Sewing Control System

It will return to the select stitch interface automatically, and you can continue to edit or

click

button to save the changes and return to the edit file main interface.

In the graph offset interface, set offset for “X: 0.0 Y: 9.0” and contrast of effect before

and after the modification is as follows:

5.13 Secondary Origin Modification

In the edit file main interface, press the

button; if there is no secondary origin in

the graphic, it will prompt "No secondary origin found, please return!" directly; if yes, it will

enter the modify secondary origin (offset point) interface, as shown in figure:

Press the direction keys to move the cursor to the starting position where it needs to

modify, and press the

key to complete modification.

It will return to the select stitch interface automatically, and you can continue to edit or

click

button to save the changes and return to the edit file main interface.

Secondary origin (offset point) only exists in the empty offset section between the

graphics connection absolute origin and the point of first start sewing. Refer to the "Collect

Modify

Secondary Origin

Summary of Contents for 6040-D















































































Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands

Jack 6040-D, Operation Instruction Manual

Search results

Summary of Contents for 6040-D

Reviews:

Related manuals for 6040-D

Brands by name

Popular brands