JABLOTRON
ALARMS
a.s.
Pod
Skalkou
4567/33
46601
Jablonec
n.
Nisou
Czech
Republic
www
.jablotron.com
||
|
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels
49
/
110
MLJ51410
GSM: 90%;
Time 17:01 22.7.
GSM signal quality
Time and date of handing over the SMS to the GSM
network
UNSET
(control of the
whole system)
Authorization:
All
JABLOTRON 100:
Status:
Section 1: Unset;
Section 2: Unset;
Section 3: Unset;
Section 4: Unset, Error;
Section 5: Unset;
Section 6: Unset;
Section 7: Unset;
Section 8: Unset;
GSM: 90%;
Time 17:01 22.7.
Installation name in accordance with the Initial setup tab
Status:
Name and status of Section 1
Name and status of Section 2
Name and status of Section 3
Name and status of Section 4
Name and status of Section 5
Name and status of Section 6
Name and status of Section 7
Name and status of Section 8
GSM signal quality
Time and date of handing over the SMS to the GSM
network
SET 1 3 5 7
(control of
selected system
sections)
Authorization:
All
JABLOTRON 100:
Status:
Section 1: Set;
Section 3: Set;
Section 5: Set;
Section 7: Set with an active zone,
GSM: 90%;
Time 17:01 22.7.
Installation name in accordance with the Initial setup tab
Status:
Name and status of Section 1
Name and status of Section 3
Name and status of Section 5
Name and status of Section 7
GSM signal quality
Time and date of handing over the SMS to GSM
UNSET 2 4 6 8
(control of
selected system
sections)
Authorization:
All
JABLOTRON 100:
Status:
Section 2: Unset;
Section 4: Unset;
GSM: 90%;
Time 17:01 22.7.
Installation name in accordance with the Initial setup tab
Status:
Name and status of Section 2
Name and status of Section 4
GSM signal quality
Time and date of handing over the SMS to GSM
9.7
Controlling the system via F-Link or J-Link
F-Link and J-Link SW are used for local and remote programming of the whole system or user editing; provide
an overview of section statuses and section control. It’s possible to control sections and PG outputs using
segments of the virtual keypad according to the configuration of keypads which are physically present
in the system. Control is also possible from the “Section” tab in the “status” column or from the lower status bar.
The system records system control according to authorization upon user authorization in the software.