JABLOTRON
ALARMS
a.s.
Pod
Skalkou
4567/33
46601
Jablonec
n.
Nisou
Czech
Republic
www
.jablotron.com
||
|
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels
13
/
110
MLJ51410
2.2.1 Configuration and splitting
The JA-10xK security system control panel is meant to be used for protecting small, medium and large
premises thanks to its range, dimensions and number of sections. A section is a part of the system to which
devices related to a protected area are assigned. Small premises may have one basic section (flat, small family
house) and in this case all devices are assigned to the same section. Medium systems can have multiple
sections (for instance flats in a block of flats) and also its own
2
nd
level common section
(common hall, cellars,
etc.). Larger premises can have many more sections (offices), 2nd level common sections (for instance such as
multi-storey buildings) and common premises like reception or a lobby as a 3rd level common section.
Very important for operation of such systems is setting the users authorisation to the lowest control level of the
very basic sections. Not for 2nd and 3rd levels of common sections. When all sections assigned to the 2nd
or 3rd level of common section are set then every common section is set automatically and automatically unset
if at least one of the basic sections is unset. Users can only control 1st level sections. See the following figure:
It is recommended for higher levels of common premises (2nd and 3rd level) to use keypads with a specific
number of segments equal to the sections used, to determine which section is set / unset after entering
the protected premises.
For 1st level keypads it is quite enough to equip them with control segment(s) assigned to a specific
section(s).
Note: The
“cleaning lady” user with access to the whole premises common section can have only a virtual
section assigned (1st level) and it does not have to include any detectors. Unsetting this virtual section also
automatically unsets all the common premises sections (2nd and 3rd level) where she can move.
Sections split into two levels
(1-common, 2,3,4-controlled
independently)
Sections split into three levels
(1-main common, 2,3-common section slaves,
4,5,6,7,8,9-controlled independently)
3rd level
(controlled)
2nd level
(controlled)
1st level
(operated)