- 11 -
D e v i c e D e s c r i p t i o n
Type label J2/ J3
By means of the nameplate identifies each actuator.
Note: The label should not be damaged or removed.
1
2
3
4
5
6
8
10
11
14
9
7
12
13
1. Model
S
S
3. Voltage range
Indication of the voltage range in which the drive can be operated.
4. Working time
S
the operating time.
5. Temperature
S
the t
°C.
6. Flange
S
7. Quality control
It is
8. Protection Class
Protection according to EN 60529
9. Attachment
S
10. Torque
S
11. CE Marking
Duty rating
M
14. Barcode
Serial number in form of numbers and barcode, wich ensures the
uniqueness of the actuator and makes it easily trackable.
pecifying the model. The name is composed of the coltage variant L or H
and the output torque Nm.
2. Type
pecifying the series.
pecifying
pecifying
emperature range in
pecifying the potential to build up to ISO 5211 flange versions.
tested - next to production-based tests - the function, duration,torque
limit feedback, all of the parameters and the presence of all parts.
pecifying the attachment square bar in mm. The conformation consists of
an octagon for direct construction for valves with parallel or 45° offset shaft
or two flat.
pecifying the torque. The starting torque results from an increased effort to
drive out of the seat fittings. The break torque is not the working torque!
By affixing the CE marking the manufacturer confirms that the product
complies with the European Directive.
12.
aximum permissible duty. The duty cycle always refers to 10min (100 % =
10 min ).
13. Barcode
Production data
