- 13 -
D e v i c e d e s c r i p t i o n
Status-LED J3/ J3C
Operating state
Time
Indicator
LED Status
Actuator has no supply voltage
100%
0000 0000 0000 0000 LED off
Actuator with power being supplied “OPEN”
100%
1111 1111 1111 1111 green
Actuator with power being supplied “CLOSE”
100%
1111 1111 1111 1111 red
Actuator moving from “OPEN” to ”CLOSE”
100%
1111 1111 1111 1111 flashing red/orange
Actuator moving from “CLOSE” to ”OPEN”
100%
1111 1111 1111 1111 flashing green/orange
torque limit function on, from “OPEN” to ”CLOSE”
200 msec 1010 1010 1010 1010 flashing red
torque limit function on, from “CLOSE” to ”OPEN”
200 msec 1010 1010 1010 1010 flashing green
BSR system (max. 3 min) BSR NC
200 msec 1000 0000 0000 0000 red/off
Actuator moving via DPS signal STOP
200 msec 1111 1111 1111 1111 blue
Actuator moving via DPS signal to position OPEN
200 msec 1111 1111 1111 1111 blue/green
Actuator moving via DPS signal to position CLOSE
200 msec 1111 1111 1111 1111 blue/red
Actuator in Manual mode/ Actuator without
power and working with the
200 msec 1111 0110 1000 0000 flashing orange
Battery protection. Danger!
The battery needs recharging. BSR disabled.
200 msec 1010 1000 0000 0000 orange/off
Actuator without power and working with the BSR
system (max. 3 min) BSR NO
200 msec 1000 0000 0000 0000 green/off
The operating status of
the actuator is displayed
by the signal light in the lid.
The flashing frequency is
shown in the table below
as a binary number (in the
"Indicator" column). The
time per binary is 200
msec.. A reporting cycle
consists of 4 columns of 4
b i n a r y n u m b e r s . T h e
configuration of the binary
numbers is as follows:
1 = LED on
0 = LED off
