- 14 -
D e v i c e d e s c r i p t i o n
There are two ways of switching from "MAN" to "AUTO" to activate the motor again:
Manual Operation - MAN
Automatic Operation - AUTO
•
Automatic mode =
AUTO
•
Manual operation mode
=
MAN
Position switch MAN
Position switch to AUTO
1. It is in MAN position an end position manually approached (Open or Closed). Upon actuation of
the limit switch the motor is activated again. If the motor is running, you can switch the lever from
MAN to AUTO and the actuator is ready for operation.
2. The actuator is switched from MAN to AUTO. The supply voltage is briefly turned off and turned on
again. This will reset the actuator and is ready for operation. For model 20 to 85, the hand lever/ hand
wheel rotates with the electrical travel.
The hand lever / hand wheel must not be blocked!
