71
8.5.2. BACK THERMAL INSULATION PANEL INSTALLATION
Screws are already in place and included with your appliance. Untighten it not completely. Two groves are
cut into the tabs to insert it easily.
Put the tab behind the bottom frame
and
align the screws into the grooves and
tighten
it enough to keep in place the thermal
insulation panel (Figure 8.5.2)
8.6. PLACEMENT OF EMBER GLASS ON THE BURNER
Ember glass is provided with your device. Always wear gloves to prevent cutting yourself on the glass.
After handling ember glass, carefully wash your hands with soap and water to remove all traces of glass.
Remove the frame of the window. Refer to section 8.3.1 REMOVING THE DOOR
Carefully open the bag containing the ember glass.
Spread ember glass carefully on top of the burner. Use the entire bag and distribute it evenly over the
entire surface of the burner so as to cover the entire plate and grooves.
Figure 8.5.2
WARNING
For optimal combustion, you must spread the mandatory required amount of ember glass (2 cups) on
the burner.
WARNING
The proper positioning of
ember glass
is essential to good and safe operation of the appliance. Ember
glass must be distributed evenly over the burner. Do not add additional
ember glass
, ornaments or
vermiculite. Use only the amount of
ember glass
provided with the appliance.
Summary of Contents for loo RGR-25
Page 18: ...18 2 3 FIREPLACE DIMENSIONS 2 3 1 LOO RGR 25 INSERT 2 3 2 MISTRAL RGP 25 PENINSULA...
Page 19: ...19 2 3 3 AUSTER RGCG 25 LEFT CORNER 2 3 4 MOUSSON RGCD 25 RIGHT CORNER...
Page 20: ...20 2 3 5 SIROCCO RGB 25 PANORAMIC 2 3 6 PAMPERO RGC 25 CENTRAL...
Page 21: ...21 2 3 7 SUROIT RGV 25 SEE THRU...