51
4.2.2. REMOTE CONTROL SETTING
Temperature display:
With the system off, press both THERMOSTAT and MODE buttons at the same time (see figure 4.2.2.a).
Check the remote
control’s LCD screen; a °C or °F symbol should have appeared at the right of the number
indicating room temperature (see figure 4.2.2.b).
Remote control of flame:
The PROFLAMME 2 system has six (6) flame intensity levels. When the system is on and the flame is at
its maximum level, each push on the downward arrow button (see figure 4.2.2.a) will bring flame height
one level lower until it there is no longer any flame.
The upward arrow button (see figure 4.2.2.a) increases flame height one level each time you push it. If
you press the upward arrow button when the system is on CPI mode (see section regarding IPI/CPI
modes), you will turn on the main burner at level six (6). Command reception is always confirmed by an
audible beep.
Figure 4.2.2.a
Figure 4.2.2.b
Summary of Contents for loo RGR-25
Page 18: ...18 2 3 FIREPLACE DIMENSIONS 2 3 1 LOO RGR 25 INSERT 2 3 2 MISTRAL RGP 25 PENINSULA...
Page 19: ...19 2 3 3 AUSTER RGCG 25 LEFT CORNER 2 3 4 MOUSSON RGCD 25 RIGHT CORNER...
Page 20: ...20 2 3 5 SIROCCO RGB 25 PANORAMIC 2 3 6 PAMPERO RGC 25 CENTRAL...
Page 21: ...21 2 3 7 SUROIT RGV 25 SEE THRU...
