IVT SP-550DW, Operating/Safety Instructions Manual

Page: 7 / 36

7
Manual instruction | Submersible pump
EN
• Line voltage does not correspond to the rating
on the data plate. ► Use the proper line voltage.
• The outlet is defective.
►
Try another socket.
• The extension cord is damaged. ► Replace the
faulty cable.
• Dirt particles filled the impeller’s chamber ►
Switch the machine off and cleanse the impeller
from inside.
• Thermal protection of the motor is actuated.
► After cooling down the machine will be started
automatically.
The machine runs, but the pressure of the fluid be-
ing pumped is low
• Dirt particles filled the impeller’s chamber.
► Should contaminated fluids be pumped. the
decrease of the capacity is possible. In case of drastic
fall in the capacity the position of the machine on a
solid basis shall be checked, switch the machine off,
if necessary and cleanse the impeller’s chamber.
If the problem cannot be remedied on the basis of
the information above, please contact a local re-
pair shop.
Maintenance and cleaning
Before any work on the machine itself,
pull the mains plug.
For safe and proper working, always keep the
machine and the ventilation slots clean.
If the machine should fail despite the rigorous
manu facturing and testing procedures, repair
should be car ried out by an authorized customer
services center for IVT garden tools.
Environmental protection
Recycle raw materials instead of disposing
as waste.
Machine, accessories and packaging should be
sorted for environment-friendly recycling.
The plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper
manufactured without chlorine.