background image

RECHARGEABLE 

COB LED WORK LIGHT 

 INSTRUCTIONS

© Copyright 2020 Eastwood Automotive Group LLC     11/20     Instruction item #33936Q     Rev 1

If you have any questions about the use of this product, please contact 

The Eastwood Technical Assistance Service Department: 800.343.9353  >>  email: [email protected]

PDF version of this manual is available at eastwood.com

The Eastwood Company     263 Shoemaker Road, Pottstown, PA 19464, USA     800.343.9353     eastwood.com

Item #33936

OPERATION

•  Fully charge Light before use.
•  Grip the lamp housing and base simultaneously, then rotate Magnetic Base through 360° in the 

vertical 

(FIG 1)

.

•  Grip the lamp housing and base simultaneously, then pull upward to allow pivoting 90° horizon-

tally on the pivoting Base 

(FIG 1)

.

•  Place the base against any ferrous metal surface for magnetic attachment.
•  Release Retractable Swivel Hook to hang from overhead objects. 
•  Depress and release round Button located at front of Housing once for Low-Intensity COB LED 

Illumination, 2nd time for High-Intensity COB LED Illumination and a 3rd time for the Flashlight.

•  Depress Button once again to turn off.

CHARGING

•  When the LED power indictor array located 

at the rear of the Housing glows a single 
RED, the battery requires charging.

  -  Flip up rubber seal and plug the  

  Micro-USB terminal of the included  
  Power Cord into the Micro-USB port  
  at the rear of the housing 

(FIG 2)

.

  -  Plug the USB terminal of the Power  

  Cord into the USB output port of the  
  included 120VAC to 5V 1A Charger.

  -  Plug wall unit into properly grounded 120 VAC, 60 Hz. outlet.
  -  Allow 4 hours for full charge.
  -  Do not use Light while charging.
  -  The indicator LED at the front of the Housing will flash while charging then change to  

  1 RED, 3 GREEN indicating full charge 

(FIG 2)

.

  -  Close Charging Port Cover to maintain IP-65 rating.
  -  Do not leave Light on charge beyond 24 hours.

 

  Batteries will automatically discharge without use and must be charged every 

3 months even if the light has not been used. 

  Do Not charge batteries in temperatures below 40°F [4.4°C].

FIG. 2

Reviews: