IVT GBC-25MT, Manual

Page: 11 / 80

11
EN
Instruction manual
PART LIST
1. Front handle
2. Auxiliary handle
3. Shoulder strap
4. Suspension point
5. On / Off switch
6. Throttle lockout
7. Throttle lever
8. Shaft tube
9. Shaft grip
10. Knob bolt
11. Recoil starter
12. Fuel tank
13. Fuel tank plug
14. Fuel pump
15. Choke lever
16. Air filter
17. Air filter cover
18. Filter element
19. Fuel filter
20. Spark plug
21. Spark plug cap
22. Spark plug spanner
23. Idle speed screw
24. Screwdriver
25. Wrench
26. Hex key
27. Fuel mixting canister
Hedge trimmer
28. Blade
29. Locking lever
30. Adjusting lever
Pole pruner
31. Guide bar
32. Sprocket
33. Saw chain
34. Chain cover
35. Oil tank
36. Fixing bolt
37. Fixing nut
38. Adjusting screw
39. Positioning pin
40. Guide bar slot
41. Flow rate adjusting screw
CONTENT OF THE BOX
Instruction manual (1 pc), auxiliary handle (1 pc),
shoulder strap (1 pc), fuel mixting canister (1 pc), spark
plug spanner (1 pc), screwdriver (1 pc), wrench (1 pc),
hex key (2 pcs), chain cover (1 pc), guide bar (1 pc),
saw chain (1 pc), file (1 pc).
INTENDED USE
This tool is a multi functional machine, with two
interchangeable tools: hedge trimmer and pole pruner.
The hedge trimmer is intended for cutting hedges and
shrubs with thicker stems and branches. The pole
pruner is intended for cutting tall branches, standing
firmly on the ground.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user’s manual and all other literature
supplied with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙ The tool must be assembled correctly before use.
∙ Only use the tool for its designed purposes.
∙ On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙ Never leave the tool unattended.
∙ Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙ Keep children and pets away. All onlookers should be
kept at a safe distance away from the tool when it is in use.
∙ The user is responsible for third parties while
working with the tool.
∙ People who aren’t acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
WARNING! The consumption of
alcohol, medication and drugs, plus
states of illness, fever and fatigue will
affect your ability to react. Do not use
this tool in any of these situations.