45
Property setting
Selected node
The IP address for the IB-E06F-M1 of for which the properties are being specified is displayed.
Double-click the node on the “
③
Node tree window” to switch the selected node.
Node tree window
The IB-E06F-M1 registered in the project is displayed.
Double-click the node to switch “
①
Selected node”.
Property main window
Write/read buttons to IB-E06F-M1
Property setting window
Settings related to motor control
Settings for error release and Network setting
Motor acceleration / deceleration settings
Ladder logic timer value settings
Ladder logic counter value settings
Swing angle settings
Motor
Error/Network
Acceleration/Deceleration
Timer
Counter
Pulse counter
Node tree window
Property main window
Selected node
Ladder
logic
Write/read buttons to IB-E06F-M1
Reads the property settings from IB-E06F-M1
Writes the property settings to IB-E06F-M1.
Writes the ladder logic to IB-E06F-M1.
Writes the ladder logic and property settings for all controllers registered in the
project.
Maintains the changed property settings, and closes the property settings.
Without maintaining the changed property settings, closes the property settings.
Read
Write
Logic DnL
ALL
OK
Cancel
1
2
5
3
1
Ladder logic
Select the ladder logic.
2
3
4
5
4
8. IB-E06F-M1 settings
MABS technical document
Safety precautions
Advanced preparation
Product check
Structures
Installation/Wiring
Control/Operation
Maintenance/Inspection
Troubleshooting
Appendix
IB-E06F-M1 settings
MABS2_E06_V×××
Original notice - U1.1
