73
Appendix
Bottom of the
product
Fingers may get stuck
when securing the product
main unit on the stay, and
the user may be injured
When putting the product
main unit on the stay, hold
the specified position of
the main unit, and prevent
fingers from getting stuck
Appendix 3.
Residual risk list/MAP
Residual risk list
Residual risk MAP
1
No.
Installation
Operation
stage
Work
Qualifications/
education
required for work
Having carefully
read the user
manual, and
having full
knowledge of
all the contents
Locations
on machine
Metal parts on
the product
Seriousness
of harm
Reference
page
Measures that
have been taken
independently
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
WARNING
Remaining risk factors
Examples of
assumed measures
Unpack/
Carry
Power supply
part to the
product
(controller)
Hands may get injured
When working, wear
protective equipment,
such as gloves
Described in the
instruction manual
Described in the
instruction manual
Described in the
instruction manual
Described in the
instruction manual
Described in the
instruction manual
Described in the
instruction manual
Described in the
instruction manual
Described in the
instruction manual
Described in the
instruction manual
2 Installation
No particular
location
Carry
Carrying the heavy load alone
may result in damage to the
main machine unit, and/or
injury to the body
When carrying, have
more than one person
hold and support the
bottom
3 Installation
No particular
location
Carry/
Install
Installation Installation
Dropping the product may
result in damage to the
product main unit, and/or
injury to the body
Check safety of installation
location in advance, and
wear protective equipment,
such as protective glasses,
footwear, and/or gloves,
when working
5
4
Operation
No particular
location
Trial run
During trial run, totes may
be unexpectedly
transferred to the product
Stop the surrounding
conveyor operation
before starting
operation
6 Operation
Top panel of the
product
All during
operation
Workers may step on the
product and lose their footing
Or fall down due to
movement of the product
Keep workers informed
thoroughly about the
prohibition of stepping
on the product.
7 Operation
No particular
location
All during
operation
If problems occur, totes
may collide with each
other, and pop out of the
equipment
For example, mount
guide rails on the
conveyor frames, and
prevent totes from
popping.
8
During
maintenance/
inspection
All during
maintenance/
inspection
Persons turning on the
power without notice may
result in unexpected
operation of the product,
and/or injury of workers
Post warning labels so
as to prevent
unauthorized persons
from turning on the
power
・
Metal parts on
the product
・
Gear section
9
During
maintenance/
inspection
All during
maintenance/
inspection
Hands and/or fingers may
be injured by metal parts,
or the user may be injured
if hands and/or fingers get
stuck in the gear or belt
section
・
Wear protective
equipment, such as
gloves
・
Do not put hands close
to rotating parts.
・
When you need to get
your hands close to
rotating parts during
operation, take off gloves
9
9
8,9
55
31
8
10
11
8,11
No.2
CAUTION
No.3
CAUTION
No.5
CAUTION
No.8
WARNING
Residual risk for which location on the machine has not been identified
Seriousness of harm
WARNING: Indicates that there is a possibility that severe injury or even death may result if protective measures have not been taken
CAUTION: Indicates that there is a possibility that minor injury may result if protective measures have not been taken
No.1
CAUTION
No.4
CAUTION
No.9
CAUTION
Residual risk list
No.6
CAUTION
This product
Emergency stop
equipment
Breaker
24V DC
power supply
unit
Safety circuit
AC power
supply
PE
No.7
CAUTION
MABS technical document
Safety precautions
Advanced preparation
Product check
Structures
Installation/Wiring
Control/Operation
Maintenance/Inspection
Troubleshooting
Appendix
IB-E06F-M1 settings
Original notice - U1.1
