Harmonic Measurement Commands
Copyright © Itech Electronic Co., Ltd.
34
Chapter8 Harmonic Measurement
Commands
NOTE
IT9121E do not support harmonic measurement function.
FETCh[:SCALar]:HARMonics:CURRent:AMPLitude?
This command is used to read the latest pre-processing current harmonics.It
will not affect the device setting values and will not trigger a new measurement
operation.It only requires to get the latest available value that has been
measured.
Command Syntax
FETCh[:SCALar]:HARMonics:CURRent:AMPLitude?
Parameters
FUNDamental|TOTal|ALL / NR1
Returned value
<NRf>
MEASure[:SCALar]:HARMonics:CURRent:AMPLitude?
This command will trigger the measurement operation to get a real-time current
harnonics.
Command Syntax
MEASure[:SCALar]:HARMonics:CURRent:AMPLitude?
Parameters
FUNDamental|TOTal|ALL / NR1
Returned value
<NRf>
FETCh[:SCALar]:HARMonics:CURRent:FUNDamental?
This command is used to read the latest pre-processing current fundamental
harmonic.It will not affect the device setting values and will not trigger a new
measurement operation.It only requires to get the latest available value that has
been measured.
Command Syntax
FETCh[:SCALar]:HARMonics:CURRent:FUNDamental?
