Commands
Copyright © Itech Electronic Co., Ltd.
31
FETCh[:SCALar]:ENERgy[:ACTive]:NEGative?
This command is used to read the latest pre-processing negative watt hour.It
will not affect the device setting values and will not trigger a new measurement
operation. It only requires to get the latest available value that has been
measured.
Command Syntax
FETCh[:SCALar]:ENERgy[:ACTive]:NEGative?
Returned value
<NR2>
MEASure[:SCALar]:ENERgy[:ACTive]:NEGative?
This command will trigger the measurement operation to get a real-time
negative watt hour.
Command Syntax
MEASure[:SCALar]:ENERgy[:ACTive]:NEGative?
Returned value
<NR2>
FETCh[:SCALar]:ENERgy:CHARge[:SUM]?
This command is used to read the latest pre-processing sum of positive ampere
hour and negative ampere hour.It will not affect the device setting values and
will not trigger a new measurement operation.It only requires to get the latest
available value that has been measured.
Command Syntax
FETCh[:SCALar]:ENERgy:CHARge[:SUM]?
Returned value
<NR2>
MEASure[:SCALar]:ENERgy:CHARge[:SUM]?
This command will trigger the measurement operation to get a real-time sum of
positive ampere hour and negative ampere hour.
Command Syntax
MEASure[:SCALar]:ENERgy:CHARge[:SUM]?
Returned value
<NR2>
