Status Register Commands
Copyright © Itech Electronic Co., Ltd.
12
Command syntax:
STATus:OPERation:ENABle <NR1>
Parameters:
0
～
65535
Example:
STATus:OPERation:ENABle 128
Query syntax:
STATus: OPERation:ENABle?
Returned value:
<NR1>
STATus:OPERation:NTRansition
This command set the value of the Operation NTR(Negative-Transition)
register.The programmed parameters define the specific bits from operation
event register which will cause the operation summary bit(OPER) of the status
register to be 1.
Command syntax:
STATus:OPERation:NTRansition <NR1>
Parameters:
0
～
65535
Example:
STATus:OPERation:NTRansition 128
Query syntax:
STATus:OPERation:NTRansition
STATus:OPERation:PTRansition
This command set the value of the Operation PTR(Positive-Transition)
register.The programmed parameters define the specific bits from operation
event register which will cause the operation summary bit(OPER) of the status
register to be 1.
Command syntax:
STATus:OPERation:PTRansition <NR1>
Parameters
0
～
65535
