Commands
Copyright © Itech Electronic Co., Ltd.
32
FETCh[:SCALar]:ENERgy:CHARge:POStive?
This command is used to read the latest pre-processing positive ampere hour.It
will not affect the device setting values and will not trigger a new measurement
operation.It only requires to get the latest available value that has been
measured.
Command Syntax
FETCh[:SCALar]:ENERgy:CHARge:POStive?
Returned value
<NR2>
MEASure[:SCALar]:ENERgy:CHARge:POSitive?
This command will trigger the measurement operation to get a real-time positive
ampere hour.
Command Syntax
MEASure[:SCALar]:ENERgy:CHARge:POSitive?
Returned value
<NR2>
FETCh[:SCALar]:ENERgy:CHARge:NEGative?
This command is used to read the latest pre-processing negative ampere
hour.It will not affect the device setting values and will not trigger a new
measurement operation.It only requires to get the latest available value that has
been measured.
Command Syntax
FETCh[:SCALar]:ENERgy:CHARge:NEGative?
Returned value
<NR2>
MEASure[:SCALar]:ENERgy:CHARge:NEGative?
This command will trigger the measurement operation to get a real-time
negative ampere hour.
Command Syntax
MEASure[:SCALar]:ENERgy:CHARge:NEGative?
Returned value
<NR2>
FETCh[:SCALar]:ENERgy:TIME?
This command is used to read the latest pre-processing intergration time.It will
not affect the device setting values and will not trigger a new measurement
