Trigger Commands
Copyright © Itech Electronic Co., Ltd.
50
Chapter10 Trigger Commands
ABORt
This command set related sensors in idle condition.When measuring process is
terminated,it will start a new self trigger system of measurement without
affected.
Command Syntax
ABORt
Parameters
None
Query Syntax
None
INITiate:CONTinuous <state>
This command is used to enable or disable the state of continous measurement
period.In off mode,that means to enable a single measurement.
Command Syntax
INITiate:CONTinuous <state>
Parameters
ON/OFF
Query Syntax
INITiate:CONTinuous?
INITiate[:IMMediate]
This command will create a single measurement operation and relevant
sensors are in request status.
Command Syntax
INITiate:IMMediate
Parameters
None
Query Syntax
None
TRIGger:IMMediate
This command is available for all trigger mode.It will generate a trigger signal.
