Iseki TJ75, Operation Manual

Page: 84 / 117

LUBRICATION & PERIODIC MAINTENANCE
83
Cleaning Air Cleaner / Vacuator Valve
FIG. 6-23: Open the hood, and remove the left side
cover and front grill.
Press the vacuator valve, 2 , to discharge any dirt inside.
If there is moisture, wipe the inside of the air cleaner, 1 ,
with a rag.
FIG. 6-24: Cleaning/Replacing Air Cleaner Filter Element
Remove the clip, 3, and take the filter element, 4, out of
the air cleaner.
Use the following procedure to clean the filter
element:
When there is dry dust
Blow air from the inside of the filter element, or lightly
tap the filter element with your hand to discharge the
dust.
When there is moist dirt or oil
Dilute a neutral household detergent in water, and soak
the filter element for about 30 minutes. Then rinse the
filter element and allow it to naturally dry.
After cleaning the filter element, push it straight back
into the air cleaner to securely assemble it.
When installing the air cleaner cover, install in order for
the letter of "TOP" to be present in front side.
IMPORTANT: Do not hit the filter element against a
rock, concrete or other hard item when
cleaning it. This may result in damage
or deformation of the filter element,
inhibiting engine performance.
After cleaning (or washing) element examine for pin
holes, punctures, or tears. If element paper, canister or
seal show any signs of physical damage, element must
be replaced.
NOTE: Replace element which has already been
washed five times.
FIG. 6-23
1
2
FIG. 6-24
4
3
FIG. 6-25