Iseki TJ75, Operation Manual

Page: 54 / 117

OPERATION
53
FIG. 5-39: Lowering speed can be readjust as necessary
with lowering rate control knob, 4.
NOTE: Changes is soil texture or ground speed of unit
may require slight readjustment of draft control
lever to maintain consistent working depth as
these can have a direct influence on implement
draft load.
If erratic operation is encountered, turn
lowering rate control knob, 5, clockwise to slow.
Lowering top link attaching location on Tractor
will also decrease sensitivity.
Detaching Implements
CAUTION: Always use POSITION CONTROL
to attach/detach implements to provide
precise control of hitch.
Select a level area to detach and store the implement.
Lower implement to ground by moving position control
lever to DOWN. If necessary, adjust leveling crank on
right lift link to level implement on ground.
Shut off engine, securely lock brakes and remove key
from Tractor.
Disconnect implement PTO drive shaft (as applicable).
Detach top link from implement and place in storage
position on Tractor by engaging spring on top link in slot
in rear center panel.
NOTE: Lengthening or shortening of top link may
be required to permit disconnection from
implement.
FIG. 5-39
4