Iseki TJ75, Operation Manual

Page: 32 / 117

INSTRUMENTS & CONTROLS
31
Forward/Reverse Power Shuttle Lever
FIG. 4-21: With power shuttle lever,1, forward or reverse
direction changes are possible without depressing the
main clutch pedal. Lift up and move lever forward to shift
to the forward travel position, move lever rearward to
shift to the reverse travel position.
NOTE: Make sure power shuttle lever is in neutral
position before starting engine.
CAUTION:Forward/Reverse direction
changes must not be made at high speed.
Refer to operation section for complete
details.
Range Shift Lever and Gear Shift Button
FIG. 4-22: Range shift lever, 2 and Gear shift button,3,
are located to the left of the operator's seat.
Range Shift Lever, 2 - Provides three major speed
changes from slowest speed range through second and
highest speed range.
Gear Shift Button, 3 - Provides four smaller gear speed
changes within each range, from first through fourth
gear positions.
FIG. 4-23: A total of twelve forward and twelve reverse
gear speeds are possible. The synchronized shifting
allows the gear shift to be changed with the Tractor in
motion. The sliding mesh gears allow the range shift
lever to be changed with the tractor stopped completely
(with main clutch pedal and brake pedal depressed).
CAUTION: Make forward to reverse, and
reverse to forward, direction changes with
Tractor stopped or traveling at very slow
ground speed.
FIG. 4-21
1
F
N
R
FIG. 4-22
3
2
FIG. 4-23