Iseki TJ75, Operation Manual

Page: 49 / 117

TJ75
48
Rear Linkage
FIG. 5-24: Linkage consists of several major
components for implement attachment and operation:
Lower Links, 1 - Primary attaching points to lower
implement pins.
Lift Rods, 2 - Connect lower links to hydraulic lift arms
for raising/lowering of lower links. The lift rod connected
to the right lower link has provisions for leveling the
implement (side to side).
Check Chain, 3 - Reduce side sway of implement.
Top Link, 4 - Adjustable, turn-buckle type to level
implement (front to rear). Top link also provides draft
load sensing for draft control.
FIG. 5-25: To match varying implements, rear linkage
is standardized according to spacing, pin size, etc. This
enables usage of alternate implements with minimal
adjustments as long as matching size or Category is
used.
This Tractor is equipped for Category Ⅰ implements
with following attaching point dimensions:
Ref.
A
Description
Lower Link Width
Lower Link Pin
Diameter
Top Link Height
Top Link Pin Diameter
1.10 (28mm)
20.1 (510mm)
0.98 (25mm)
Dimension (Size)
32.5 (825mm)
B
C
D
FIG. 5-24
3
4
2
1
FIG. 5-25