Iseki TJ75, Operation Manual

Page: 20 / 117

INTRODUCTION
19
INTRODUCTION
The information in this publication describes the operation, maintenance and servicing of the TJ75 Tractor. Every
effort has been made to provide correct and concise information to you, the operator, as available at date of book
publication. Your ISEKI Dealer is available should items in this book or details of your machine not be understood.
This book is supplied with each machine to familiarize the operator with proper instructions needed for operation and
maintenance. Studying and adhering to these instructions will insure optimum machine performance and longevity. A
machine that is maintained properly and operated in the intended manner will provide greater dividends than one that
is neglected and/or operated in manner other than as intended. Design and servicing of this machine has been kept
as simple as possible to permit maintenance operations to be carried out with tools normally available.
This book should be thoroughly read and understood prior to operation of this machine. Inexperienced operators
should study contents of this publication and receive instruction from an experienced operator when possible. Your
ISEKI Dealer can also assist in areas concerning machine operation and provide details concerning safe operation. it
is suggested that this booklet be kept readily accessible, preferably with the machine, for future reference if questions
or concerns arise. If the original book should become damaged, consult your Dealer in regards to acquiring a
replacement.
Customers are strongly advised to use an official ISEKI Dealer in connection with any service problems and
adjustments that may occur. The ISEKI Dealer network is specially trained and equipped for all service work and to
advise customers on specific applications of the Tractor in local conditions.
CAUTION: In some of the illustrations used in this Operator Instruction Book, panels or guards may
have been removed for clarity. Never operate the Tractor with these panels and guards removed. If
the removal of a shield is necessary to make a repair, it MUST be replaced before operation.
CAUTION: READ THIS BOOK IN ITS ENTIRETY PRIOR TO OPERATING MACHINE.
Use only ISEKI parts for repairs and/or replacement.