Iseki TJ75, Operation Manual

Page: 6 / 117

SAFETY
SAFETY
PERSONAL SAFETY INSTRUCTIONS
Whenever you see the words and symbols below, used in this Operator`s Instruction Book and on decals, you MUST
take note of their instructions as they relate to personal safety.
DANGER: This symbol together with the
word DANGER indicates an imminently
hazardous situation that, if not avoided, will
result in DEATH OR VERY SERIOUS INJURY.
WARNING: This symbol together with the
word WARNING indicates a potentially
hazardous situation that, if not avoided,
could result in DEATH OR VERY SERIOUS
INJURY.
CAUTION: This symbol together with
the word CAUTION is used to indicate a
potentially hazardous situation that, if not
avoided, may result in MINOR INJURY.
IMPORTANT: The word IMPORTANT is used to identify
special instruction or procedures which,
if not strictly observed, could result in
damage to, or destruction of the machine,
process or its surrounding.
NOTE: The word NOTE is used to indicate points
of particular interest for more efficient and
convenient repair or operation.
Understand thoroughly the following precautions, always
keep them in mind before, during, and after operation,
and never take chances.
MAKING YOUR TRACTOR A SAFE VEHICLE
HOW TO MAINTAIN SAFETY
(1) Never attempt to do the following: Modification of the
structure of the tractor Installation of other type engine.
Installation of tires of other than the original tire size.
Any malfunctions or failures of the tractor due to
unauthorized modification are not covered by the war-
ranty.
(2) This machine cannot be driven on a public road without
authorization by a local government agency, etc.
When transporting an unauthorized machine on a
public road, load it on a truck.
When traveling with an implement wider than the
tractor, put red caution markers such as flags (red
lamps at night) in the most visible locations on
both sides of the implements, and place a SLOW
MOVING VEHICLE sign in a place a where it is
easily seen by other drivers. Operate the machine
carefully keeping in mind that the implement is
FIG. 1-1