Iseki TJ75, Operation Manual, Page: 52 / 117

OPERATION
51
Using Position Control
FIG. 5-32: Type of Work - Attaching/detaching
implements and other operations requiring implement
to be kept at constant height above ground. Also used
with tool bars having flexible row units and implements
equipped with gauge (support) wheels.
FIG. 5-33: Lever Positions - Use position control lever, 1,
to adjust hitch and implement position.
FIG. 5-34: Highest and Lowest Position Adjustment
Highest position adjustment dial,2, sets highest position
of hitch and implements. Lowest position adjustment
dial,3, sets lowest position of hitch and implements.
Highest adjustment by position control lever,1, limited
to the position fixed byhighest position ajustment dial,2,
and lowest position adjustment dial,3.
To Begin Work - Align Tractor and implement in field
and move position control lever, 1, forward (toward
DOWN). Adjust implement height using position control
lever and set adjustable dials, 2 and 3, as desired.
When Turning - Move position lever, 1, rearward (toward
UP) to raise implement. Finish turning and return lever
against stop to resume operation.
To Finish Work and Transport - Move position control
lever, 1, fully rearward in quadrant.
FIG. 5-32
FIG. 5-33
1
FIG. 5-34
3 2