VX121P/151P/171P(-QM57)
User’s manual rev.0.0 (Preliminary)
34 of 68
MU-C656.xxxxxxxxxx r.0.0-EN
By the Intel Graphics Drivers it’s possible to select the Graphics Properties for the
display. The display are named:
Built in Display = internal LCD panel
Monitor
= external monitor with VGA interface
Digital Display
= external monitor with DVI interface
The Intel Graphics Drivers detect if a VGA or a DVI monitor is connected to the
computer and adjust the Graphics Properties options.
The Panel PC allows display on internal LCD panel and, at the same time, on one
external monitor (VGA or DVI) by the Graphics properties “Clone Displays”.
5.12 Connecting a VGA monitor
The computer supports a connector for an analog monitor standard 15 pin VGA
(blue color) placed on I/O panel.
Notice
The VGA monitor can be connected to the Panel PC by a standard
2m. VGA cable
A plug and play VGA monitor could be detected as “PnP Monitor” if only the VGA
cable is full pin type (pin 9 included). Otherwise it is detected as “Default monitor”.
The following picture shows the Graphics Properties for the LCD+Monitor VGA.
5.13 Connecting a DVI monitor
The computer supports a connector standard 24 pin DVI-D (white color) placed on
I/O panel.
The DVI monitor must be connected to the computer before boot time.
The following picture shows the Graphics Properties for the LCD+Monitor DVI.
