VX121P/151P/171P(-QM57)
User’s manual rev.0.0 (Preliminary)
26 of 68
MU-C656.xxxxxxxxxx r.0.0-EN
5 Connecting
Before connecting and switching on the Panel PC, please read carefully the
following information.
Caution
During a thunderstorm do not make connection and do not touch
power lines and signals cables.
5.1 Connecting 115/230Vac power supply
The Panel PC is equipped (except for different order option) with a 115/230Vac
input power supply provided with standard IEC60230 3 pin C14 connector.
The power supply input will accept 115/230Vac auto-ranging.
A standard IEC60320 3 pin C13 power cord is provided for plug-in to an outlet
having a protective earthing.
Warning
The power cord must be connected to an outlet having a protective
earthing. Failure to follow this warning could result in electrical shock.
Since the Panel PC does not have a power switch, turning off and
completely disconnecting power require pulling the power plug.
A power outlet provided with a protective earthing and a mains
disconnect switch are required nearby and easily approachable.
Notice
To prevent an unintentional unplugging of the power plug from the
Panel PC, we recommend fastening the power cord.
The internal power supply has protection against overcurrent by means of a fuse.
Warning
Do not try to disassemble the power supply unit to replace the fuse or
other parts.
If a failure occurs on the power supply, the whole power supply unit
must be replaced with an equal or equivalent approved spare part.
