VX121P/151P/171P(-QM57)
User’s manual rev.0.0 (Preliminary)
48 of 68
MU-C656.xxxxxxxxxx r.0.0-EN
Caution
The socket is polarized and CF insertion is one way only requiring a
light strength. If the CF does not enter into the socket please do not
force, probably you inserted the CF in the wrong way.
Notice
The CF to be inserted in the Panel PC must be Compact Flash 3.0
specification or previous. The CF must be max. IDE UDMA2 or PIO
Mode 4.
To allow Windows XP booting the CF must be fixed disk type.
The CF must be configured as Master IDE or Slave IDE (by jumper on the adapter
board) depending on the application.
Notice
If two CF are connected as master/slave devices sharing the same
IDE cable then one must be configured as Master and the other one
as Slave
The use of flash disk requires the same operating rules of the hard disk (with the
exception of the 20 seconds power off delay and that it is suitable for 24h x7
operating continuously).
8.11 Hard disk 2,5” + Compact Flash
The Panel PC can be equipped (as order option) with a 2,5’’ HDD Sata plus a CF
socket.
The CF installation is committed to the user.
