Invacare Spree XT, Owner'S Operator And Maintenance Manual

Page: 51 / 76

SECTION 5—ARMS
Part No 1118364
51
Spree XT
Adjusting T-Arm Transfer Assists And/or Side Guards
NOTE: For this procedure, refer to FIGURE 5.13.
1. Remove the T ‐ Arm from the wheelchair. Refer to Installing/Removing T ‐ Arms on
page 47.
2. Remove the two socket screws that secure the side guard to the bottom clamp.
NOTE: Adjusting the side guards will directly affect the position of the transfer assist.
3. Perform one of the following:
• Small Side Guards ‐ Move the bottom clamp up to one of two mounting positions
in the side guard.
• Large Side Guards ‐ Move the bottom clamp up to one of three mounting positions
in the side guard.
4. Secure the side guard to the bottom clamp with the two socket screws.
5. Install the T ‐ Arm onto the wheelchair. Refer to Installing/Removing T ‐ Arms on
page 47.
FIGURE 5.13 Adjusting T-Arm Transfer Assists And/or Side Guards
Socket
Screws
Bottom Clamp
Transfer
Assist
Side Guard
T-Arm